Saturday, November 3, 2018

Desert Zombie Apocalypse Refuge 25-28mm Scale Table Top Miniature Wargame Scenery

When the zombies began to swarm the cities and towns, Jack decided the best course of action was to retreat to his little isolated refuge in the desert.


Jack had started with a quonset hut for the basic building. Then he added some modifications to help protect against any wandering zed that might find its way to the site.


First, he welded bits of rebar over the windows to block access. The single door was sheathed with addition metal on the inside for added strength.


Cutting a hatch in the hut's ceiling, Jack constructed a simple wooden platform on the top of the building. He added a metal trapdoor that can be secured from inside.


This wood deck provides Jack with an alternative defensive platform for protecting his new home. It offers an elevated firing position if needed. In addition, Jack can use some of the longer leftover pieces of the rebar as simple lances to stab at zombies who may gather at the base of the hut. With a bit of practice, he has found it relatively easy to jab the rebar pole into zeds as they try to force their way into the hut. An added benefit to this low tech defense is it does not generate any loud noise to attract more zombies.


A clean 55-gallon drum has been set into a stand on he deck to act as a water reserve. Piping runs from the drum to the interior of the hut.


The reinforced hut provides Jack with a simple, but sturdy refuge as long as no large zombie horde wanders by.


This scenery piece is designed to be compatible with 25 to 28mm scale game miniatures. The base measures approximately 5 x 5 inches (128 x 128 mm). In addition to a zombie apocalypse setting, the hut can find a home in a range of other modern or near future game scenarios.

Visit my store to see my terrain and scenery pieces that are currently available.

Friday, October 5, 2018

Miniature Devil Cult Altar for 25-28 mm Scale Miniature War Games and RPGs

What rites are conducted at this altar? The images of an evil deity and death surely indicate that this is the scene of unholy rites.


This scenery piece stands approximately 2-1/4 inches (58 mm) tall. The base measures 1-1/2 inches (38 mm) in diameter. The 25mm cultist is shown for size comparison.


The altar can be used in a wide variety of game settings. It can appear in the hidden lair of a secretive death cult in any classic horror scenario.


In an action adventure pulp game, it could be the focal point for the human sacrifices of an evil tribe in Darkest Africa or on an isolated South Pacific island.


It certainly would fit right in many fantasy worlds caught in the struggle between good and evil.


You can see more of my miniature terrain and scenery pieces by visiting my store.

Saturday, September 8, 2018

Miniature Roadside Shrines 25-28mm Scale Scenery For War Games and Role-Playing Games

Roadside shrines are used to honor the memories of departed individuals.

Here are a number of simple wooden roadside shrines containing the skulls of local personages who are revered for their acts.

Miniature wooden roadside shrine T1532 in 25-28mm scale - front view.
Miniature wooden roadside shrine T1532 in 25-28mm scale - side view.
Miniature wooden roadside shrine T1532 in 25-28mm scale - rear view.

 Maybe they were heroic warriors who fought valiantly in a battle in the area. Or perhaps religious martyr or leaders. Maybe they are simply the ancestors of the local inhabitants who honor their memories in this way.

Miniature scenery piece wooden roadside shrine T1533 in 25-28mm scale - front view.
Miniature scenery piece wooden roadside shrine T1533 in 25-28mm scale - side view.
Miniature scenery piece wooden roadside shrine T1533 in 25-28mm scale - rear view.
Miniature scenery piece wooden roadside shrine T1533 in 25-28mm scale - right side view.

Perhaps your adventurers must visit a particular shrine to discover a clue important to their mission. There may be a written message hidden in the shrine, or showing respect at a shrine may allow a visitation from a friendly spirit. But beware of damaging a shrine as it is likely to cause a bad reaction by its local adherents!

Small miniature roadside shrine T1534 25-28mm scale war game scenery piece - front view.
Small miniature roadside shrine T1534 25-28mm scale war game scenery piece - left side view.
Small miniature roadside shrine T1534 25-28mm scale war game scenery piece - rear view.
Small miniature roadside shrine T1534 25-28mm scale war game scenery piece - right side view.

These scenery pieces can be inserted in many gaming scenarios ranging from fantasy to modern pulp horror. They are designed to work with 25 to 28mm scale miniatures in table top war games and role-playing games.

You can see more of my miniature terrain and scenery pieces by visiting my store.

Saturday, August 25, 2018

Miniature Laboratory Industrial Equipment for 25 to 28 mm Scale Table Top Gaming and Role-Playing Games

Here are two new pieces of miniature equipment just delivered to our scientist's lab. Both could be used as power generators in any industrial or laboratory setting for miniature table top wargaming.

The T2313 unit has a central baffled coil.

T2313 industrial equipment scenery for 25-28mm miniature games - front view.
T2313 industrial equipment scenery for 25-28mm miniature games - right end view.
T2313 industrial equipment scenery for 25-28mm miniature games - rear view.
T2313 industrial equipment scenery for 25-28mm miniature games - left end view.

The T2312 unit possesses a containment coil at its center.

Miniature mad science laboratory scenery piece T2312 for 25-28mm scale table top wargames - front view.
Miniature mad science laboratory scenery piece T2312 for 25-28mm scale table top wargames - right end view.
Miniature mad science laboratory scenery piece T2312 for 25-28mm scale table top wargames - rear view.
Miniature mad science laboratory scenery piece T2312 for 25-28mm scale table top wargames - left end view.

Both scratchbuilt scenery pieces measure approximately 4 inches (100 mm) long. They are scaled for use with 25 to 28mm miniatures such as the scientist figure shown in the pictures. The pieces could be used in a range of role-playing and wargame settings from modern super hero, pulp, and future science fiction.

You can see more of my miniature terrain and scenery pieces at my store.

Thursday, July 5, 2018

Trio of Miniature Graveyard Monuments for 25 to 28-mm Scale Table Top Wargames

The autumn full moon fights to find a clearing in the thick dark clouds. Dead leaves skitter about the overgrown graveyard. A damp fog rises from the dank ground. Captured in the soft glow from the dancing moonbeams, tall stone monuments seem to swim in the ghostly tendrils .

Fantasy adventurer walks among stone grave monuments. Figure is 25-28mm scale.
Fantasy adventurer walks among stone grave monuments. Figure is 25-28mm scale.

What cemetery doesn't boast a few such larger monuments? Here are a few that would look right at home in any miniature table top graveyard.

Front view of three graveyard monuments for 25 to 28mm scale wargames.
Front view of monuments.
Left side view of three graveyard monuments for 25 to 28mm scale wargames.
Left side view.

This trio of monuments stand between 1-1/8 to 1-3/4 inches (28 to 43 mm) in height. Their bases measure 1 inch (25 mm) in diameter.

Right side view of three graveyard monuments for 25 to 28mm scale wargames.
Right side view.
Rear view of three cemetery monuments for 25 to 28mm scale wargames.
Rear view.

Designed for use with 25 to 28-mm scale miniature wargame figures. They can easily be used in many game worlds including fantasy, horror, science fiction and pulp adventure.

Visit my store to see my terrain and scenery pieces that are currently available.

Wednesday, June 27, 2018

Medieval Fantasy Miniature Pillory Posts for 25 to 28-mm Scale Game Figures

Pillory posts have appeared throughout history in many forms. These simple wooden poles are designed to restrain captives awaiting punishment for a wide range of violations of law.

Medieval knight with battleaxe standing between two pillory posts with chains in 25mm scale.

A combination of metal chains and rings offer a variety methods of holding prisoners.

Three styles of pillory posts for 25 to 28 mm scale wargame miniatures.

In miniature gaming, they can provide a focal point for many game scenarios. The posts could appear in the central public square of many medieval towns. Or they can be found in the lairs of evil creatures where victims are held in dank dungeons.

Two 28mm scale pillory posts flanking a weather-beatten stone statue.
Three pillory posts designed for use with 25 to 28 mm scale table top wargames.

These scenery pieces are designed for use 25- to 28mm scale miniature figures. They stand about 1-3/4 inches (44 mm) in height. The bases are 1 inch (25 mm) in diameter,

Visit my store to see my terrain and scenery pieces that are currently available for purchase.

Friday, May 18, 2018

Mad Scientist T2311 Trans Time Portal Laboratory Equipment for 25-28mm Scale War Games

Our scientist has been busy investigating the possibility of time travel. Here is his latest laboratory equipment using his T2311 Trans Time Portal!

Overhead view of the T2311 Trans Time Portal miniature laboratory equipment for 25 to 28 mm scale war games.
Overhead view of the T2311 Trans Time Portal and accessory equipment.
The centerpiece is the portal device itself. The main ring creates a time vortex which causes fluctuations in the time continuum.

Trans Time Portal experimental 25-28mm scale lab device - front view.
Front view of the Trans Time Portal device.
Trans Time Portal experimental 25-28mm scale lab device - view of the charging coils.
Side view of the charging coils.
Trans Time Portal experimental 25-28mm scale lab device - rear view.
Rear view of the main Trans Time Portal.
Trans Time Portal experimental 25-28mm scale lab device - the controll unit.
Side view with the central control unit.
Additional support equipment also is important in the experiments.

The hyper-wave containment unit.
The hyper-wave containment unit.
The flux power generator for the T2311 Trans Time Portal.
The flux power generator.
These miniature scenery pieces can be used in a variety of table top miniatures games. They are designed for use with 25 to 28 mm scale figures.

Visit my store to see my terrain and scenery pieces that are currently available.
 
------------------------------- google analytics page codes -------------------------------